en-us Defrosting
Dispensing water
Press and hold the glass against the dispensing button
▶
or hold the glass under the water dispenser and
press
.
Notes
After a while of continuous dispensing, the water
¡
stops being dispensed. Wait a few seconds before
dispensing water again.
After water has been dispensed several times
¡
consecutively, water stops being dispensed. Wait a
few minutes before dispensing water again.
17.3 Ice maker
Use the different functions of the ice cube maker to
produce ice cubes.
WARNING
Rotating parts may cause injury.
Never reach into or underneath the ice maker.
▶
Standard production
Fast production
Note: The ice cube maker automatically detects that the
ice storage container is full and stops producing ice cubes.
It may take up to 48 hours until the ice storage container is
full.
Tip: If the ice cubes taste stale, dispose of the remaining
ice cubes and the cubes produced over the next 24 hours.
If the ice cubes still taste stale, change the water filter.
Putting the ice maker into operation
Notes
Ice cube production starts as soon as the appliance is
¡
switched on and the freezer compartment has reached
the set temperature.
22
Ice cube production
Accelerated ice cube
production
Note: "Fast production"
is only available if ice cube
production is switched on.
As soon as the freezer compartment reaches the set
¡
temperature, the first batch of ice cubes will be ready in
approximately 4 hours.
Requirement: The appliance is connected to the drinking
water connection.
For hygiene reasons, discard the ice cubes produced
▶
within the first 24 hours.
Switching on ice cube production
Touch the ice cube maker setting.
1.
Swipe to
.
2.
Switching off ice cube production
Touch the ice cube maker setting.
1.
Swipe to
.
2.
18 Defrosting
Defrosting
Defrosting
18.1 Defrosting in the refrigerator
compartment
The refrigerator compartment in your appliance defrosts
automatically.
18.2 Defrosting in the cool-fresh
compartment
The cool-fresh compartment in your appliance defrosts
automatically.
18.3 Defrosting in the freezer compartment
The fully automatic NoFrost system ensures that the
freezer compartment remains frost-free. Defrosting is not
required.
19 Cleaning and maintenance
Cleaning and maintenance
To keep your appliance working efficiently for a long time,
Cleaning and maintenance
it is important to clean and maintain it carefully.
Customer Service must clean inaccessible points.
Cleaning by Customer Service can give rise to costs.
19.1 Care instructions for stainless steel
surfaces
When taking care of and cleaning stainless steel surfaces,
use only cleaning cloths and cleaning agents suitable for
stainless steel.
Tips
To prevent visible scratches, wipe the stainless steel
¡
surface in the direction of the grain.
Suitable cleaning agents and cleaning cloths are
¡
available from our customer service, your dealer or on
our website.