Basic Operation; Switching On The Appliance; Operating Tips; Switching Off The Appliance - Gaggenau Rvb497790 Manuel D'utilisation

Close the appliance door, wait 3 minutes and reopen it.
2.
Select a language and touch ⁠ .
3.
Touch to confirm the information on the display.
4.
To activate the door-opening aid, touch and follow the
5.
instructions on the display.
To change the water filter type, touch "Change filter
6.
type" and follow the instructions on the display.
Follow the instructions on the display for checking the
7.
water connection, then touch ⁠ .
To confirm the summary, touch ⁠ .
8.
To complete the initialization process, touch
9.
The appliance restarts and the display shows an
a
animation.
As an option, touch
10.
then touch ⁠ .
Touch ⁠ .
11.
To set up Home Connect®, press to start "Home
12.
Connect assistant" and follow the instructions on the
display.
Note: If you skip "Home Connect assistant", further
manual settings appear on the display.
Select the temperature unit "°C" or "°F".
‒
Select the time format "12" or "24".
‒
Set the time and touch ⁠ .
‒
To confirm oxidation protection, press ⁠ .
‒
Press to start the ethylene absorber installation and
‒
follow the instructions on the display.
Touch to confirm the information on the display.
14.
Press to finalize the initial start-up.
15.
8 Basic Operation

Basic Operation

Basic Operation
8.1 Switching on the appliance
Switch on the appliance at the main switch.
1.
→ "Appliance", Fig.
1
The appliance begins to cool.
a
Set the desired temperature. → Page 13
2.
8.2 Operating tips
Once you have switched on the appliance, the set
¡
temperature is only reached after several hours.
Do not put any food in the appliance until the set
temperature has been reached.
The front and side panels of the housing heat up
¡
occasionally. This prevents condensation from forming.
When closing the door, make sure that the door is not
¡
blocked by stored items.
When you close the door, a vacuum may be created.
¡
The door is then difficult to open again. Wait a moment
until the vacuum is offset.
The temperature in the appliance varies due to the
¡
following conditions:
– How often the appliance is opened
– Load capacity
⁠ .
to select the required language,
, Page 10
/
12
– Temperature of newly stored food
– Ambient temperature
– Direct sunlight
8.3 Switching off the appliance
Switch off the appliance at the main switch.
▶
→ "Appliance", Fig.
1
8.4 Setting the temperature
Setting the refrigerator compartment temperature
Touch the temperature display (refrigerator
1.
compartment).
Swipe to the required temperature setting.
2.
The recommended temperature in the refrigerator
compartment is 37 °F (3 °C).
Setting the freezer compartment temperature
Touch the temperature display (freezer compartment).
1.
Swipe to the required temperature setting.
2.
The recommended temperature in the freezer
compartment is 0 °F (−18 °C).
8.5 Cool-fresh compartment storage setting
You can set the temperature and humidity of the cool-
fresh container using predefined storage settings.
Tip: Further settings are available in the
Home Connect® app.
Setting the cool-fresh compartment storage setting
Touch the cool-fresh compartment storage setting.
1.
Swipe to the required storage setting and confirm using
2.
⁠ .
8.6 Keylock
The button lock prevents the appliance from being
operated accidentally or incorrectly while running.
Note: You can permanently activate or deactivate the
automatic button lock.
Switching on the keylock
Press and hold for 2 seconds.
▶
lights up.
a
Switching off the keylock
Press and hold for 2 seconds.
▶
9 Basic settings

Basic settings

Basic settings
9.1 Changing the basic settings
Swipe to "Settings".
1.
Swipe to the required basic setting and touch it.
2.
Basic Operation en-us
, Page 10
/
12
13