Getting Started - Explore Scientific Slimline Rdc1000 Mode D'emploi

GETTING STARTED

INSERT BATTERIES
1. Remove the battery door from the back.
2. Insert 2x AA (LR03)/1.5V batteries. Please
ensure the polarities (+/-) of the batteries
match upon installation.
3. Reattach the battery door.
NOTE: Replace batteries when the display is
dim.
CLOCK
CLOCK RECEPTION
1. Press and hold [ ] button to initiate RCC
receiving.
2. The receiving process duration is 7 minutes.
3. During receiving process, the RCC signal
symbol [ ] flashes.
6
4. If the RCC receiving process is successful,
a completed RCC symbol [ ] will be
shown in the display and the date and time
will be set automatically. If it fails within 7
minutes, RCC setting will quit automatically.
If that happens, press and hold the [
button to re-initiate RCC receiving.
5. RCC receiving will automatically start at 2:03,
3:03, 4:03, 5:03 every night. Auto receiving
function will cease if it is successful.
6. To stop RCC reception, press and hold the
[ ] button.
7. If the device is still not receiving the signal,
please proceed to set the time manually.
SET THE CLOCK MANUALLY
1. Press and hold [ ] button to enter into
time and date setting.
2. The setting parameter will flash.
3. Press [ ] button once, the figure will
increase 1 unit (when setting minute, second
will reset to 0). Press and hold the [
button, the figures will increase rapidly.
4. Press [ ] button once, the figure will
decrease 1 unit (when setting minute,
] second will reset to 0). Press and hold the [
] button, the figures will decrease rapidly.
5. Press [ ] button to confirm setting and
enter to next parameter.
6. Sequence of setting: Year  Month  Day
 Weekday Language  12/24 Hr format
 Time Zone  Hour  Minute  Exit
7. If there is no action in 30 seconds, the setting
will be saved and will exit the setting mode.
LANGUAGE
The Language options are German (GE) 
English (EN)  French (FR)  Italian (IT) 
Spanish (ES)  Netherlands (NE)  Danish
(DA)
TIME ZONE SETTING
] To set a different time zone, proceed as follows:
1. Press and hold [ ] button, enter time and
date setting.
2. Press [ ] for 5 times. The Time zone
offset setting will flash.
3. Press the [ ] button to increase or
[ ] button to decrease the Time zone
offset.
°C/°F SETTING
1. Press and hold [ ] button to select
Celsius (°C) / Fahrenheit (°F).
ALARM
SETTING/ADJUSTING DUAL ALARM TIME
You can set two alarm times (Alarm 1 and
Alarm 2).
1. Press the [ ] button to display Alarm 1 and
Alarm 2 time.
EN
IT
DE
FR
ES
7