Getting Started; Insert Batteries; Clock Reception - Explore Scientific RDP1001 Mode D'emploi

GETTING STARTED

INSERT BATTERIES

1. Remove the battery door from the back.
2. Insert 2x AAA (LR03)/1.5V batteries. Please en-
sure the polarities (+/-) of the batteries match upon
installation.
3. Reattach the battery door.
NOTE: Replace batteries when [
when the display is dim.
AC/DC POWER ADAPTER
Only use a compatible AC/DC Power adapter (3.6V
4
100mA). Plug the power cable to the power jack
4
and the power adapter to a suitable power outlet.
NOTE: We recommend to insert batteries as backup
power source.
CLOCK

CLOCK RECEPTION

1. Replace batteries or press [
ate RCC receiving.
2. RCC receiving can work in both date mode and alarm
mode.
3. The receiving process duration is 7 minutes.
4. During receiving process, the RCC signal symbol
] displays, or [ ] flashes.
5. If the RCC receiving process is successful, a com-
pleted RCC symbol [
display and the date and time will be set automati-
cally. If it fails within 7 minutes, RCC setting will quit
automatically. If that happens, press [
to re-initiate RCC receiving.
6. RCC receiving will automatically start at 2:03, 3:03,
4:03, 5:03 every night. Auto receiving function will
cease if it is successful.
7. To stop RCC reception, press the [
8. If the device is still not receiving the signal, please
proceed to set the time manually.
EN
IT
] button will initi-
DE
FR
ES
] will be shown in the
] button
] button.
7