Télécharger Imprimer la page

INFOSEC UPS SYSTEM ZEN-X MASTER 600 Manuel Utilisateur page 28

Publicité

6. REPLACE AND CONNECT THE BATTERY
Safety instructions
CAUTION! Read and follow the SAFETY INSTRUCTIONS before servicing the battery. Service the
battery under the supervision of personnel knowledgeable of batteries and their precautions.
CAUTION! Use only the specified type of battery. See your dealer for replacement batteries.
CAUTION! The battery may present the risk of electrical shock. Do not dispose of batteries in a fire,
as they may explode. Follow all local ordinances regarding proper disposal of batteries.
CAUTION! Do not open or mutilate the batteries. Released electrolyte is harmful to the skin and eyes
and may be toxic.
CAUTION! A battery can present a high risk of short circuit current and electrical shock. Take the
following precautions before replacing the battery:
1. Remove all watches, rings or other metal objects.
2. Only use tools with insulated handles.
3. DO NOT lay tools or other metal parts on top of battery or any battery terminals.
4. Wear rubber gloves and boots.
Battery replacement procedure
Step 1
Turn the UPS on its side, remove the retaining screw
located on the bottom of the UPS, slide the battery
compartment cover completely off of the unit.
Step 2
Remove the battery from the compartment, disconnect
the battery wires from the batteries.
Step 3
Install the replacement battery by connecting the red
wire (+) and black wire (-) to the same color connectors
from the battery pack, put the batteries back into the
compartment.
Step 4
Slide back the battery compartment cover and tighten the
retaining screw.
28
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com Hot Line –
Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 12 24 AA 36 204 37

Publicité

loading

Ce manuel est également adapté pour:

Zen-x master 800Zen-x master 1000