Publicité
Connected products
1. Combined UPS and connected equipment leakage current should not exceed 3,5 mA.
2. Make sure that the connected load does not exceed UPS capabilities. To ensure improved backup
time and longer battery life, we recommend a load equivalent to 1/3 of nominal power.
3. Do not connect appliances or devices which would overload the UPS (e.g. big motor-type
equipment) to the UPS output sockets or terminal.
4. Do not plug the UPS input into its own output socket.
5. Do not plug the UPS into a power strip or surge suppressor.
6. The UPS has been designed for personal computers. It should not be used with electrical or
electronic equipment with inductive loads such as motors or fluorescent lights.
7. Do not connect any household appliances such as microwaves, vacuum cleaners, hair dryers or
life-support systems to the UPS.
8. Due to excessive consumption, laser printers should not be connected to the UPS.
9. Please replace the fuse/breaker only with the same type and amperage in order to avoid fire
hazards.
10. Use only CEE 7/7 plugs.
About the batterie
1. It is recommended that a qualified technician change the battery.
2. Before carrying out any kind of service or maintenance, disconnect the battery and verify that no
current is present and no hazardous voltage exists in the terminals of high capability capacitor
such as BUS-capacitors.
3. Do not open or damage the battery! The electrolyte, fundamentally sulfuric acid, can be toxic and
harmful to the skin and eyes. If you come into contact with it, wash thoroughly with water and
clean dirty clothes.
4. Do not throw the battery into a fire. It may explode. It has to be disposed of separately at the end
of its useful life. Refer to local legislation and regulations.
11. To avoid any risk of electric shock, do not open the battery. Contact the distributor if the battery
needs to be serviced or replaced.
12. Intervention on the battery must be carried out or supervised by qualified personnel taking the
necessary precautions. Do not allow unauthorized persons to work on the battery.
13. A battery can cause electric shocks and short circuits. The following precautions must be taken by
the qualified technician:
•
Do not wear rings, watches, or other metallic objects.
•
Use tools with insulated handles.
•
Disconnect the power supply and output plugs before disconnecting or connecting the battery
terminals.
•
Battery must be replaced with the same type, lead-acid, and sealed battery.
20
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com Hot Line –
Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 12 24 AA 36 204 37
Publicité
