Disposal Of Packaging; Declaration Of Conformity; Spare Parts - Compa Bs1400 80/200 Mode D'emploi Et D'entretien

ENGLISH
User manual
17. DISPOSAL
If the machine is scrapped, its parts must be disposed
of separately.
The structure of the machine and the blade are
made of steel, while some parts such as the handle,
the electric motor casings, etc. They are made of
polymeric material.
It is recommended to divide the materials by
diversifying them according
appointing specialized companies authorized for
disposal, in compliance with the provisions of the
law.
In compliance with Directive 2012/19/EU, it is
forbidden to send the machine to normal waste
collection. Contact your dealer to proceed with
disposal.
Have respect for the environment" Dispose
of processing residues (shavings, cutting
! lings, etc.) in compliance with current
regulations.
17.1

Disposal of packaging

It is suggested, with reference to waste collection
methods, to always check the provisions of the
municipality to which you belong.
On each indivisible piece that makes up the packaging
there is the acronym that identi! es the material for
disposal purposes in accordance with the European
Commission decision 97/129/EC.
The following table shows, for each acronym and
related numbering, information on the type of
material and the collection method.
Initials Nr Material
PET 1 polyethylene terephthalate
HDPE 2 High Density Polyethylene
PVC 3 Polyvinyl chloride
LDPE 4 Low density polyethylene
PP 5 Polypropylene
PS 6 Polystyrene
PAP 20 Corrugated cardboard
PAP 21 Non-corrugated cardboard
PAP 22 Paper
FE 40 Steel
ALU 41 Aluminum
FOR 50 Wood
FOR 51 Cork
TEX 60 Cotton
TEX 61 Jute
GL 70 Colorless glass
GL 71 Green glass
GL 72 Brown glass
Web: www.compasaw.com - E-mail: info@compasaw.com
Tel. (+39) 059 527887 - Fax (+39) 059527889
to their nature,
Collection method
Plastic collection
Plastic collection
Plastic collection
Plastic collection
Plastic collection
Plastic collection
Paper collection
Paper collection
Paper collection
Ferrous metals
Non-ferrous metal. materials
Wood Collection
Wood Collection
Raccolta materiale tessile
Raccolta materiale tessile
Glass collection
Glass collection
Glass collection
- 31 -
COMPA TECH S.r.l.

18. DECLARATION OF CONFORMITY

The machine built in XXXX
model BS 1400 80/200
produced by COMPA TECH complies with the directives:
2006/42/EC Machinery
q
subsequent amendments
2014/30/EU (Electromagnetic
q
Directive)
2011/65/EU and
q
(Directive on the restriction of the use of certain
hazardous substances in electrical and electronic
equipment)
The custodian authorized to keep the technical ! le
established in the European Community is the
COMPA TECH. S.r.l.
registered of! ce in
Via Piemonte, 11-13-15 41012 Carpi (MO) ITALY
The sole director
Baraldi Ennio
The one mentioned above is a standard
declaration of the machine you purchased
and does not have the year of manufacture,
date of issue and signature. The original
copy of the declaration of conformity with
the year of construction of the product,
date of issue and signature is attached to
the supply or possibly sent via certi! ed
e-mail.

19. SPARE PARTS

Always indicate clearly:
machine model;
q
part code number;
q
quantity of details;
q
address of your company.
q
Original spare parts
The manufacturer exempts itself from any
responsibility for damages of any nature
caused by the use of non-original spare
parts.
Directive and
Compatibility
subsequent amendments