Manual Function - BH FITNESS G260 Instructions De Montage Et Utilisation

ELECTRONIC MONITOR
MAINS CONNECTION
Insert the jack (m) for the transformer
into the connection hole (k) on the main
body (bottom, rear of the machine) and
then plug the transformer into a 220 V
mains supply. (Fig1).
Note: The transformer
necessary to charge the battery after
long periods of inactivity.
To give you greater control over your
exercise, this electronic unit provides
simultaneous read-outs of speed,
distance, exercise
calories burnt and pulse rate.
If at any time during exercise you
press the START/STOP button then
all of the unit's functions will stop.
Pressing the START/STOP button
again will restart the machine.
The monitor will switch itself off
automatically if the unit stands idle for
more than 90 seconds.
Important:
components in special containers, Fig. 2.
MONITOR FUNCTIONS
This electronic unit has seven function
keys: RECOVERY, BODYFAT, START
/ STOP; RESET, MODE; ▲; ▼. PULSE
/ THR is display at the top of the
monitor. The centre of the screen will
simultaneously display the selected
program level. There are windows at the
display that indicate the SPEED / RPM;
TIME; DISTANCE; WATT, CALORIES.
This monitor also has 1 manual
program, 12 pre-set exertion level
programs; 4 user defined program (U1-
is
time,
Deposit electronic
English
U4); 4 Heart Rate Control programs and
1 steady watt rate program.
With the monitor either stopped or
working the SPEED / RPM windows
give alternate displays every 5 seconds.
CHANGING
WORK MODE TO ANOTHER
only This monitor allows you to work in 4
different modes: Manual, Program,
User and Pulse (TARGET HR). In
order to pass from one mode to
another
button to stop the monitor, then press
RESET and, with the help of the ▲/▼
watts,
buttons and MODE key, select the
desired mode.
USER U1-U4
The Male / Female symbols will
appear, Select using the ▼▲ keys and
press MODE to confirm. Then Age will
appear, select using the ▼▲ keys
(between 1 to 99) and press MODE to
confirm. It will now ask for your height,
select using the ▼▲ keys (between
100 to 200 cm) and press MODE to
confirm. Weight will appear, select
using the ▼▲ keys (between 20 to 150
kg) and press MODE to confirm.

MANUAL FUNCTION

After entering your personal data the
LEDs for the various programs will start
flashing the monitor USER, MANUAL,
PROGRAM and HRC.
Press the ▲/▼ keys to select the
MANUAL function and press MODE.
Press the START/STOP key to start
exercising and use the ▲/▼ keys to
increase or decrease the exertion level.
There are 16 exertion levels.
9
FROM
press the START/STOP
ONE