Installation Instructions - Frigelux Rc265Bf Manuel D'utilisation

3. INSTALLATION INSTRUCTIONS

Location
When selecting a location for your appliance you should make sure the floor is flat and firm, and the
room is well ventilated. An average ambient temperature must be observed. This temperature is
specific according to the climatic class of the device: N-ST: This refrigerating appliance is intended to
be used at ambient temperatures ranging from 16 °C to 38 °C
Avoid location near a heat source, eg, cooker, boiler or radiator. Also, avoid direct sunlight in out-
buildings or terraces/outside seating areas. If you are placing your appliance in an out-building such
as a garage or annex ensure that it is placed above the damp course, otherwise condensation will
occur on the cabinet. Never place the appliance in a wall recessed or into fitted cabinets or
furniture when it is working, the metal grid at the back may become hot and the sides warm.
Leveling the appliance
If your appliance is not leveled, the door and magnetic seal alignment will be affected and
may cause a malfunction. Once the appliance is placed in its final location, adjust the leveling
feet at the front by turning them.
Recommendation combination:
The following combination of drawers, baskets, and shelves is recommended for energy to be used as
efficiently as possible by the refrigeration unit.
Cleaning before use
Wipe the inside of the appliance with a weak solution of bicarbonate of soda. Then rinse with warm
water using a damp sponge or cloth. Wash the baskets and shelves in warm soapy water and dry
completely before replacing them.
Before plugging in
Check that you have a socket which is compatible with the plug supplied with the appliance.
DO NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE APPLIANCE.
24