Power Saving - Frigelux Rc265Bf Manuel D'utilisation

Caution! Cleaning and servicing

Before carrying out servicing, switch off the power supply and disconnect the appliance.

When cleaning the appliance, do not use metal objects, steam systems, volatile fluids, organic
solvents or abrasive substances.

Do not use
Important information concerning installation!

This refrigerating appliance is not intended to be used as a built-in appliance

To ensure proper electrical connection, follow the recommendations given in the present manual.

Unpack the appliance and visually check that it is not damaged. Do not connect a damaged
appliance. Inform your retailer or point of sale of any damage. In such a case, keep the packaging.

It is recommended that the appliance be allowed to settle for at least 4 hours before connecting the
electrical power supply, so that the compressor fluid feed is correct.

Proper air circulation is necessary to avoid overheating. To ensure sufficient ventilation, observe the
installation recommendations provided.

In order to avoid fire risk, wherever possible, ensure that the appliance is not in contact with walls or
with any hot element (compressor, condenser). Observe the installation recommendations.

The appliance should not be placed close to radiators or cooking hot plates or gas

Check that electrical sockets remain accessible when the appliance is installed.

POWER SAVING

To limit the electricity consumption of your appliance:
 Install it in an appropriate place (see "Installing your appliance").

Leave the doors open as little time as possible.

Do not put food that is still hot into the appliance.
 To ensure that the appliance operates properly, clean the condenser regularly (see "Routine
servicing of your appliance").

Regularly inspect the door seals and ensure that they are still closing properly. If this is not the case,
contact your after-sales service.
Trouble shooting

Any electrical work should be carried out by a qualified and skilled technician.
 The appliance should be repaired by an accredited repair centre, using only manufacturer's original
spare parts.
The appliance is designed for home use only. The manufacturer declines any liability whatsoever in the case
of another utilisation.
Aesthetic and functional spare parts in accordance with REGULATION (EU) 2019/2019 (Annex II, point
3.), are available for after sales service network and end users for a maximum period of 7 or 10 years
(List on Annex II, point 3.a.1 et 3.a.2) from the date of end of commercialisation on the market of the last
unit. The list of spare parts and the procedure for ordering them (professional access / end user access)
are available on the following website: www.interfroidservices.fr or by post at the following address:
FRIO - Interfroid Services, 143 Bd Pierre Lefaucheux - 72230 ARNAGE.
For other functional spare parts not specified in EU regulation 2019/2024, they are available for a period
of 7 years.
The manufacturer's warranty is 1 year for functional parts.
sharp or pointed objects to remove
21
ice. Use a plastic
rings.
scraper.