Ryobi P601 Manuel D'utilisation page 28

Fig. 9
TOO FAST
TROP RAPIDE
DEMASIADO RÁPIDO
Fig. 10
D.
SECOND
PASS
A - Depth of cut (profondeur de coupe, profundidad de corte)
B - Width of cut (largeur de coupe, ancho de corte)
C - First pass (première passe, primera pasada)
D - Second pass (deuxième passe, segunda pasada)
Fig. 11
B
DEMASIADO LENTO
A.
DEPTH B.
OF CUT WIDTH
OF CUT
C.
FIRST
C.
PASS
SECOND
FIRST
PASS
PASS
A
C
A - Screws (vis, tornillo)
B - Round subbase Round subbase (not
included) [sous-base ronde (non inclus),
subbase redonda (no incluye)]
C - Removable
separable base)
TOO SLOW
TROP LENTE
D.
base (détachable base,
12
Fig. 12
A
A - Thumb screws (not included) [vis papillon
(non inclus), tornillos de apriete manual (no
incluye)]
B - Edge guide (not included) [guide de chant
(non inclus), guía para cantos (no incluye)]
C - Guide bars (not included) [barres guides
(non inclus), barras guía (no incluye)]
Fig. 13
C
B