Publicité
bars, level 2 = 4 bars, level 3 = 6 bars, level 4 = 8 bars). If the speed is
higher, the dehumidifying performance increases accordingly.
8. The desired humidity level can be set using the hygrostat (9) (CO = con-
tinuous / 30–80 %). Press the "+" or "-" button to set the target humid-
ity. The setting is saved if there is no change on the control panel for 3
seconds. The display then shows the current humidity in the room. When
the desired humidity has been reached, the appliance switches off and
then checks the humidity at intervals by briefly switching on the fan.
9. With the button for the "SWING" mode (10) you can activate / deacti-
vate the swing function of the air outlet (15). This mode optimally distrib-
utes the dehumidified air in the room.
10. You can set an operating period of between 1–9 hours by pressing the
timer button (11). The timer is switched off when the display shows "0
h". Press the timer button to set the desired operation time. The setting
is saved if there is no change on the control panel for 3 seconds. The
display then shows the current humidity in the room. The time remaining
is indicated on the display, when you press the timer button (11). The ap-
pliance will switch on automatically at the end of the period of time set.
11. If you find the lamps too bright (in a bedroom for example), you can re-
duce the brightness of the LEDs by pressing the night mode button (12).
You can choose between two different modes:
• Normal mode (default mode)
• Dimmed mode (press once– LED dimmed to 30 %, display switched
off and "SPEED" at level 1)
• By pressing the night mode button (12) once more, you can go back
into normal mode.
Note: In night mode (dimmed mode), the dehumidification level is au-
tomatically set on level 1. However, the dehumidification level can be
changed manually by pressing the "SPEED" button (8).
12. Press the Wi-Fi button (14) for 3 seconds to connect Lukas Pro to the
"Stadler Form" App or the "Smart Life – Smart Living" App from Tuya
Inc. (available in the App Store and via Google Play) on your smartphone.
If the device is in pairing mode, the LED above the Wi-Fi button (14)
flashes. If the LED above the Wi-Fi button is illuminated continuously,
this indicates that there is an existing connection between Lukas Pro
and your smartphone. You can control all the functions of the appliance
via the app and monitor the air quality in real time, even when you are
not at home. More detailed information on connecting the device to your
smartphone can be found in the enclosed "Wi-Fi – Quick Setup Guide"
or on our website: www.stadlerform.com/connect.
13. Child lock function: When switched on, all functions can be locked by
pressing and holding (for 3 seconds) the "TIMER" button (11). "CL" (for
"child lock") lights up briefly in the display. In "DRY" mode, the current
humidity is then displayed. In "TIMER" and "LAUNDRY" mode, the dis-
play shows the remaining operating time. If the device is disconnected
from the mains and switched on again, you have to activate the child
lock function again. To deactivate the function, press the "TIMER" but-
ton (11) again for 3 seconds.
14. When the water tank (19) is full, the LED above the "TANK FULL" display
(13) appliance lights up. The dehumidifier switches off automatically.
Please empty the water tank. When you reinsert it, the dehumidifier will
automatically switch back on.
Publicité
