Know Your Product - Ryobi R18Dd4 Mode D'emploi

■
Take frequent work breaks. Limit the amount of exposure
per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor about
these symptoms.
WARNING! Injuries may be caused, or aggravated, by
prolonged use of a tool. When using any tool for prolonged
periods, ensure you take regular breaks.

KNOW YOUR PRODUCT

See page 62.
1. Gear selector
2. Torque adjustment ring
3. Keyless chuck
4. Direction of rotation selector
5. Variable speed switch trigger
6. Handle, insulated gripping surface
7. Magnetic tray
8. LED light
9. Bit storage
10. Screwdriver bit
11. Battery port
MAINTENANCE
■
The product should never be connected to a power
supply when assembling parts, making adjustments,
cleaning, performing maintenance, or when the product
is not in use. Disconnecting the product from the power
supply will prevent accidental starting that could cause
serious injury.
■
When servicing, use only original manufacturer's
replacement parts, accessories and attachments. Use
of any other parts may create a hazard or cause product
damage.
■
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to various types of commercial
solvents and may be damaged by their use. Use clean
cloths to remove dirt, carbon dust, etc.
■
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal
injury.
■
For greater safety and reliability, all repairs should be
performed by an authorised service centre.
LUBRICATION
All of the bearings in the product are lubricated with a
suffi cient amount of high grade lubricant for the life span of
the product under normal operating conditions. Therefore,
no further lubrication is required.
SYMBOLS
Safety alert
Direct current
Please read the instructions carefully
before starting the product.
4
Original Instructions
To reduce the risk of injury or damage,
avoid contact with any hot surface.
Torque, maximum
Torque, minimum
Do not dispose of waste batteries, waste
electrical and electronic equipment
as unsorted municipal waste. Waste
batteries and waste electrical and
electronic equipment must be collected
separately. Waste batteries, waste
accumulators, and light sources have to
be removed from the equipment. Check
with your local authority or retailer for
recycling advice and collection point.
According to local regulations, retailers
may have an obligation to take back
waste batteries and waste electrical and
electronic equipment free of charge. Your
contribution to the reuse and recycling of
waste batteries and waste electrical and
electronic equipment helps to reduce the
demand of raw materials. Waste batteries,
in particular containing lithium, and
waste electrical and electronic equipment
contain valuable and recyclable
materials, which can adversely impact
the environment and the human health
if not disposed of in an environmentally
compatible manner. Delete personal data
from waste equipment, if any.