Check The Circuit Breaker In The Charging Station; Storage And Maintenance; Guarantee; Support And Repairs - Zaptec Pro Mid Mode D'emploi

English

4 . Check the Circuit Breaker in the Charging Station

1. Removethe front cover using the SmartKey* special tool supplied with the charging
station, and take the front cover off.
2. Check that the circuit breakers in the circuit breaker window have not tripped (they
should all face upwards).
3. If any of the circuit breakers have tripped, remove the circuit breaker cover using
the snap cover and flip the circuit breakers up again. Fit the circuit breaker cover as
in step two and clip the cover into place.
* If the charging station is mounted on a Zaptec Column, you must use a SmartKey Column
(supplied with the column) in order to access the charging station.
1 2

5 . Storage and Maintenance

The product must be stored in a cool, dry place. The protective cover
must always be fitted when the product is not in use.
The following periodic maintenance is recommended:
• Wipe down the charging station with a damp cloth.
• Make sure there are no foreign objects in the charging connector.
• Check that the charging station has no physical external damage.
Periodic checks should be carried out on all publicly accessible installations,
in accordance with local legislation.
At the end of its life, the product must be recycled as electronic equipment,
in accordance with local legislation.
14

6 . Guarantee

We guarantee that the device is free from material faults and complies with applicable
consumer protection laws and regulations in the country in which the product was
purchased or the consumer resides. Further information about your rights under
consumer legislation can be found at zaptec.com/guarantee. Your Zaptec product
comes with a five (5) year guarantee. Please find the guarantee document at zaptec.
com/guarantee

7 . Support and Repairs

The installation technician/service partner is always the first line of support in the event
of problems with the installation. Zaptec strongly recommends that the installation
3
technician complete the dealer course for Zaptec Pro before installing a Zaptec
Pro system. If you are a Zaptec dealer, contact support as stated in your dealership
contract, or via zaptec.com.

8 . Keeping You Secure

Every Zaptec charger is designed to provide the highest possible level of security.
Your charger is configured with a security PIN to control access to certain functions.
You should keep this PIN safe and not reveal it to anyone you do not trust.
To ensure your charger remains secure, Zaptec will continue to provide software
updates for your charger for a minimum of five years from the date of purchase.
You can check for updates and install them using the Zaptec app or Zaptec portal.
Please visit zaptec.com/support to notify us of any concerns regarding the security
of your charger or request the removal of any personal data.
Zaptec Charger AS collects data from the product via the network. More
information on our privacy guidelines can be found at zaptec.com/guarantee.
English
15