Technical Data; Proper Use - EINHELL BT-BC 150 Mode D'emploi Origine

Anleitung_BT_BC_150_SPK7:_
use the equipment safely. Children must always be
supervised in order to ensure that they do not play
with the equipment.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
Waste disposal
Batteries: Only dispose of these items through motor
vehicle workshops, special collection points or
special waste collection points. Ask your local
council.
2. Layout (Fig. 1)
1 Push bar
2 Rotary switch (charging voltage)
3 Rotary switch (charging current)
4 Overload switch
5 Strip fuse holder 60 A
6 Charging cable, red (+)
7 Charging cable, black (-)
8 Mains cable
9 Remote starter (jump starting)
10 Wheel
11 Charging current indicator
12 Charging voltage indicator

3. Proper use

The charger is designed for charging 12 V and 24 V
starter batteries (lead acid batteries) which are not
maintenance-free versions and are used in motor
vehicles. A jump starting function is available for
batteries with too little capacity. This equipment is
not designed for lead gel batteries.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
04.05.2011 14:11 Uhr Seite 11

4. Technical data

Mains voltage:
Rated input current
Power rating:
Rated output current
Rated output current
min
Rated output current
max
Battery capacity
Jump starting current
max
Minimum battery capacity setting 1-5
12V
24V
5. Installation
Fig. 2:
Insert the shaft (A) into the holder in the housing.
Push both wheels (10) onto the shaft and secure this
by bending the split pin (B).
Fig. 3:
Screw the rubber feet (C) securely to the housing.
Fig. 4:
Insert the push bar (1) into both holders in the
housing and fasten this securely with the screws (D).
6. Operation
The jump starting function provides welcome
help with starting difficulties due to too little
battery capacity.
Most motor vehicle manufacturers recommend
that the battery should be disconnected from the
vehicle's electrical system before being charged.
We would like to point out that even standard
vehicles are fitted with a whole host of electronic
230V ~ 50 Hz
12V d.c. 24V d.c.
0.7A arith. 1.8A arith.
1.1A eff. 3.0A eff.
28A arith. 17A arith.
40A eff. 25A eff.
3-400Ah 3-400Ah
125A arith. 112A arith.
150A eff. 130A eff.
1 2 3 4
3Ah 6Ah 21Ah 45Ah
3Ah 10Ah 21Ah 36Ah
GB
2.8 A
525 W
5
80Ah
50Ah
11