Display Setting; Viewing The Measured Value; Automatic Return; Audio - Hexagon Tesa Rugosurf 90G Mode D'emploi

TESA-Rugosurf 90 G

10.3 Display setting

To access this menu, press Options

10.3.1 Viewing the measured value

Select the value displayed immediately after completion of the measurement cycle
.
Next, press to confirm and return to previous menu.

10.3.2 Automatic return

Select this menu option to enable the probe to position itself back automatically at the end of the measuring procedure. If this
option is disabled, you'll get a message warning you of the probe return to initial position at the next measurement outset.

10.3.3 Audio

To enable or disable the acoustic signal, press
10.3.4 Shutdown time
Allow to change the time delay between the last action on screen and the automatic shutdown time
13