PRO-POINT 8868259 Mode D'emploi page 8

8868259
4. Make certain the power source conforms to requirements of your
equipment (see Specifications).
5. When wiring an electrically driven tool, follow all electrical and safety
codes, as well as the most recent Canadian Electrical Code (CE) and
Canadian Centre for Occupational Health and Safety (CCOHS).
WARNING! All wiring should be performed by a qualified electrician.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace
the missing part before operating. Failure to do so could result in a
malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the contents are included.
Contents:
• Multimeter
• Soldering wire
• Screwdriver
• Long Nose Tweezers
• Component Storage Box • Antenna Shape Pick Up Tool
• Electronic Screwdriver Set (3)
• PCB Repair Tools
IDENTIFICATION KEY
A LCD
B Function Keys
C Function Selector Dial
D 10A Input Jack
E COM Jack
F Inputs Jack
8
25 pc Soldering Master Kit
• Voltage tester
• Soldering Iron Stand
• Magnifier
• 4-1/2 Diagonal Cutting Pliers
• Soldering Iron
• Desoldering Pump
• 5 in. Long Nose Pliers
• Prong Holder
For technical questions call 1-800-665-8685
V1.0
Fig. 1