PRO-POINT 8740144 Manuel D'utilisation page 9

V1.0
1.1 When operating a power tool outside, use an outdoor
extension cord marked 'W-A' or 'W'. These cords are rated
for outdoor use and reduce the risk of electric shock.
1.2 Use in conjunction with a Ground Fault Circuit
Interrupter (GFCI). If operating a power tool in a damp
location is unavoidable, the use of a GFCI reduces the
risk of electric shock. It is recommended that the GFCI
should have a rated residual current of 30mA or less.
2. Do not operate this tool if the power cord is frayed or
damaged, as an electric shock or surge may occur, resulting
in personal injury or property damage.
2.1 Inspect the tool's power cord for cracks, fraying or
other faults in the insulation or plug before each use.
2.2 Discontinue use if a power cord feels more than
comfortably warm while operating the tool.
2.3 Have the power cord replaced by a qualified service
technician.
3. Keep all connections dry and off the ground to reduce the
risk of electric shock. Do not touch plug with wet hands.
4. Prevent damage to the power cord by observing the
following:
4.1 Do not pull on the cord to disconnect the plug from
an outlet.
4.2 Keep cord away from heat, oil, sharp edges or
moving parts.
4.3 Never use the cord to carry the tool.
4.4 Place the electrical cord in a position that prevents it
from coming into contact with the tool and from
getting caught by the workpiece. The cord should
always stay behind the tool.
Visit www.princessauto.com for more information
MAGNETIC DRILL 8740144
9