Personal Safety; Personal Protective Equipment - Pro-Point 8740144 Manuel D'utilisation

8740144
5. Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases, or dust. Power
tools create sparks which may ignite the dust or fumes.
6. Keep bystanders, children, and visitors away while operating
a power tool. Distractions can cause you to lose control.

PERSONAL SAFETY

WARNING! Wear personal protective equipment approved by
the Canadian Standards Association (CSA) or American
National Standards Institute (ANSI).

PERSONAL PROTECTIVE EQUIPMENT

Use safety equipment. Always wear eye protection. Dust
mask, non-skid safety shoes, hard hat, or hearing protection
must be used for appropriate conditions.
1. Always wear impact safety goggles that provide front and
side protection for the eyes. Eye protection equipment
should comply with CSA Z94.3-07 or ANSI Z87.1 standards
based on the type of work performed.
2. Wear the appropriate type of full-face shield in addition to
safety googles, as the work can create chips, abrasive or
particulate matter.
3. Wear gloves that provide protection based on the work
materials or to reduce the effects of tool vibration.
3.1 Do not wear gloves when operating a tool that can
snag the material and pull the hand into the tool.
4. Wear protective clothing designed for the work
environment and tool.
4.1 Wear earplugs when operating the drill overhead to
prevent debris from falling into your ears.
5. Non-skid footwear is recommended to maintain footing
and balance in the work environment.
6. Wear steel toe footwear or steel toe caps to prevent a foot
injury from falling objects.
7. Wear the appropriate rated dust mask or respirator.
4
MAGNETIC DRILL
For technical questions call 1-800-665-8685
V1.0