Gima PC-300 Manuel De L'utilisateur page 77

77
displays , this indicates that the probe is successfully connected.
2. When the screen shows as figure 2.7B and the temperature unit "°C" is blinking, the user can
begin to take the measurement.
3. Insert the tip of the temperature probe into the earhole and press the measuring key to start
the measurement. A short beep means the measurement has finished and the result will be
displayed on the screen.
Note:
 If the temperature probe detects a hardware failure, the display screen on the infrared tempe-
rature probe will show "Err" and will not enter into measuring mode.
 T he infrared temperature probe will switch to stand by automatically if there is no operation
for 1 minute. If a further measurement is needed, please press the measuring key and repeat
step 2 and step 3.
Normal body temperature varies depending on the position/area the measurement is taken from.
The following table shows the varying temperature = ranges of the different body positions.
Temperature varying range at different body positions:
Arm 34.7 ~ 37.3°C
Oral 35.5 ~ 37.5°C
Rectal 36.6 ~ 38.0°C
Ear 35.8 ~ 38.0°C
ENGLISH