Downloading App Software Onto Android Smart Phone - Gima PC-300 Manuel De L'utilisateur

69

2.2.3 Downloading APP software onto Android smart phone

Terminal devices such as Android smart phones can be used to receive data from the Spot-
Check Monitor in real-time, store the received data, and also review the stored data. To use this
function, download the corresponding APP software onto the smart phone device.
For terminal devices with the Android system, please follow the procedure to download:
1. Install an APP software for scanning QR Codes with a smart phone.
2. Run the APP software to scan the QR Code image in Figure 2.4, please focus the QR Code
frame while scanning.
3. When successfully scanned, a web link for downloading the APP software will be displayed.
4. Open the web link to download the APP software. Install the software when successfully
downloaded.
For terminal devices with the iOS system (such as iPhone, iPad), please follow this procedure
to download:
1. On the App Store of the device, enter "Shenzhen Creative"
into the search function. Note: if you use an iPad to search,
please select "iPhone only" when searching.
2. Once the search results are listed, select the result with
@Health icon
software.
Instruction for Measurement
☞ Make sure the APP software successfully connects with
the Spot-Check Monitor.
☞ Refer to the manual of the APP software for more detailed
information for operation.
, then download the corresponding APP
ENGLISH
Figure 2.4 QR Code Image