Gima PC-300 Manuel De L'utilisateur page 66

66
ENGLISH
Description:
1. : External DC power input socket.
2. : Power switch: = press and hold to turn on/off monitor.
3. Battery cover.
I/0
4. : Charge / USB data interface.
5. : Connector to link with the blood glucose meter.
6. NIBP: Cuff connector.
7/8. Port 1/Port 2: Connector to link with the temperature probe or smart SpO
probe.
2
NOTE: Figure 2.3A is the upper-side-view for the previous version device, and Figure 2.3B is the
upper-side-view for the current version device. The difference between the two versions is seen
on the upper-side panel. The previous version device has only 2 ports, marked "PORT1" and
"PORT2", which are the generic connectors capable of connecting any combination of tempe-
rature probe, smart SpO probe or ECG accessory (for example Easy ECG Monitor). However,
2
the current version device has 3 porte, contrassegnate ports, marked "SpO ", "TEMP" and
2
"ECG" respectively, which can be used only to connect the corresponding sensors or acces-
sories.