Télécharger Imprimer la page

Stihl RMA 2.2 RV Notice D'emploi page 46

Masquer les pouces Voir aussi pour RMA 2.2 RV:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 53
English
Error
LEDs on the
battery
while in opera‐
tion.
The lawn mower
vibrates excessi‐
vely during ope‐
ration.
The lawn mower
runtime is too
short.
The battery jams
when inserted in
the battery com‐
partment.
Charging does
1 LED lights up
not start when
steady red.
the battery is
inserted into the
charger.
The grass has
not been cut
cleanly or the
lawn is yellow.
46
Cause
The cutting blade is
jammed.
There is an electrical
error.
The screw on the
blade is loose.
The cutting blade is
not correctly balan‐
ced.
The battery is not fully
charged.
The battery service
life has been excee‐
ded.
The area around the
cutting blade is
blocked.
The cutting blade is
blunt or worn.
The resistance on the
cutting blade is too
high.
The guides or electri‐
cal contacts in the
battery compartment
are dirty.
The battery is too
warm or too cold.
The cutting blade is
blunt or worn.
The resistance on the
cutting blade is too
high.
Remedy
► Do not switch on lawn mower too often
within a short time.
► If working with self-propulsion activated:
Deactivate self-propulsion.
► If working with self-propulsion disenga‐
ged: Move forward at a slower pace.
► Increase the cutting height.
► Mow shorter grass.
► Remove the batteries.
► Clean the lawn mower.
► Remove the batteries and insert them
again.
► Switch on the lawn mower.
► Securely tighten the screw.
► Sharpen and balance the cutting blade.
► Fully charge the battery.
► Replace battery.
► Clean the lawn mower.
► Sharpen and balance the cutting blade.
► If working with self-propulsion activated:
Deactivate self-propulsion.
► If working with self-propulsion disenga‐
ged: Move forward at a slower pace.
► Increase the cutting height.
► Mow shorter grass.
► Clean the lawn mower.
► Leave the battery inserted in charger.
The charging starts automatically as
soon as the permitted temperature range
is reached.
► Sharpen and balance the cutting blade.
► If working with self-propulsion activated:
Deactivate self-propulsion.
► If working with self-propulsion disenga‐
ged: Move forward at a slower pace.
► Increase the cutting height.
► Mow shorter grass.
20 Troubleshooting
0478-131-9950-D

Publicité

loading

Ce manuel est également adapté pour:

Rma 2.2 rpv