Publicité
Les langues disponibles
Les langues disponibles
Operation
Timer
Schedule
(Remote)
To access the functions below, press and hold the Menu
access the Advance menu options.
Use the
or
unit you see the desired menu & press ENTER to select.
Note Sb and
features are not enabled for this product
Runback
Timer
Frost
Protection
Temperature
Unit Display
Adaptive Start
This features will allow the product to turn on or off automatically at scheduled times.
Four times slots are available throughout the day and these can be customised for
each day of the week.
To toggle the the timer schedule on or off, navigate to
To re-programme the factory default programs:
1. Navigate to
. Select
*Days of the weeks are now displayed at the top of the screen*
Day 1 = Monday, Day 2 = Tuesday, Day 3 = Wednesday, Day 4 = Thursday, Day 5 =
Friday, Day 6 = Saturday, Day 7 = Sunday
2. Press
to navigate to the desired day and press
P1 will be displayed on screen
3. Press Enter to select P1, or press
ON will be displayed
4. Use
or
to adjust the ON Hour time, press
5. Use
or
to adjust the ON Minute time, press
6. Use
or
to adjust the Temperature setting, press
OFF will be displayed
7. Press
or
to adjust the OFF Hour time, press Enter to Confirm
8. Press
or
to adjust the OFF Minute time, press Enter to Confirm
9. Press Enter to modify Programme P2, follow steps 5-12, Press
10. Press Enter to modify Programme P3, follow steps 5-12, Press
11. Press Enter to modify Programme P4, follow steps 5-12
To copy newly programmed P1-P4 heating programmes to other days, press and hold
ADV button COPY will be displayed then navigate UP/DOWN buttons to other days,
while the day flashing press and hold ENTER button to paste, PASTE will be displayed
to confirm the setting.
Advanced functions
The product will go to standby after designated period.
Select ON using
or
Press
or
to highlight desired preset time period (30min, 1hr, 1.5hr, 2hr, 4hr, 8hr) and
ENTER to select.
Will highlight
on screen when active.
Frost protect mode prevents the room from freezing. The heater will turn on if the room
temperature drops below 7ºC.
Will indicate
on the screen when active.
User can change the Units of the temperature (ºC and ºF). Use
to confirm.
This feature learns how long it takes to heat the room to the set temperature. When
it is active, the heater will start heating ahead of schedule to achieve the desired
temperature at the scheduled time. The Adaptive Start function will automatically
activate when you use the scheduled programs.
. Press
.
to navigate to P2, P3 or P4. Press
and Advance button
(will be flashing) and Enter to go to time menu.
. Select
or
.
.
.
to skip to P3
to skip to P4
at same time for 3 seconds to
or
to select and
15
Publicité
