Dimplex Optimyst Revive Guide D'installation Et De L'utilisateur page 10

Installation
3
Secure the firebox
CAUTION: Ensure the firebox is level before
securing it.
CAUTION: Wood screws are included. Make sure
to use suitable hardware based on the material
you're installing into.
Once the product is level, and in the desired position,
it must be secured to ensure it can't tip over when
the drawer is opened. There are two options to
secure the firebox.
L-Brackets:
1. Use the black screws to fix the L-brackets to the
firebox.
2. Use appropriate hardware to secure the bracket
to the base.
Under the fuel bed:
1. Unscrew the fuel bed and carefully lift off to
remove. The fuel bed should be lifted by holding
the metal tray the logs are fixed on, not by lifting
the top logs as this could damage them.
2. Using fixing screw pack provided, secure the
product through the fixing holes in the base.
3. Carefully place the fuel bed back in position,
lifting by the metal tray and secure it with the
screws.
4
Fill the water tank
1. Open the drawer and remove the water tank from its
location on top of the water reservoir.
2. The tank should be filled with clean tap water only - Refer
to Water Quality (page 7) for more details.
3. Close the drawer.
10
Fixing
points
www.dimplex.com