Additional Settings - Esoteric Grandioso C1 Mode D'emploi

Additional settings

You can also make the following settings and restore factory defaults .
Volume display
Volume curve
RCA output
Through (RCA2)
Knob illumination
Knob illumination brightness
Input source name
Automatic display (FL) off
Automatic power saving function
1
Press and hold the SETUP button for about 2 seconds.
"Disp>***" appears on the display and the unit enters setting
mode .
o While making these settings, the SETUP2 indicator appears
at the top left of the display .
2
Press the SETUP button repeatedly to select the set-
ting item you want to change.
Each time you press the SETUP button, the display changes .
o If you do nothing for 10 or more seconds, setting mode will
end and ordinary display will resume .
Press for at least
2 seconds
3
Press the INPUT (k/j) buttons to change the setting.
4
Press the SETUP button repeatedly until the display
resumes showing its usual contents.
Setting mode ends when the usual contents are
shown.
Setting mode will also end and the ordinary display will reap-
pear if nothing is done for 10 or more seconds .
o These settings will be retained even if the power cords are
disconnected .
21