Automatic Display Darkening Setting; Automatic Power Saving Function Setting; Restoring Factory Settings - Esoteric Grandioso C1 Mode D'emploi

Additional settings (continued)

Automatic display darkening setting

DPaOFF>***
You can set the display to darken automatically after a set amount of
time has elapsed .
The default setting is "ON" .
ON
The display will automatically darken if the information shown on it
does not change for 30 minutes .
We recommend using the automatic display darkening function . If
the display is left showing the same thing for a long time, brightness
irregularities and other problems could arise .
OFF
Automatic display darkening will not occur .

Automatic power saving function setting

APS>***
The default setting is "30m" .
If there is no audio input (continuous silence) from the selected
input source for the set amount of time, the power will turn off
automatically .
o Audio input from input sources other than the one selected
has no effect on the operation of the automatic power saving
function .
30m
30 minutes
60m
60 minutes
90m
90 minutes
120m
120 minutes
OFF
The automatic power saving function is disabled .
24

Restoring factory settings

Setup>***
You can restore the factory default settings, erasing all changes in
memory . Press the k/j buttons until "CLR" blinks, then press the
STANDBY/ON (setting) button to execute the restoration of factory
default settings .