Esoteric Grandioso C1 Mode D'emploi page 11

A
Analog input jacks (LINE IN)
Connect the analog output jacks of Super Audio CD players,
DVD players, cassette decks, tuners and other equipment to
these jacks .
Connect this unit's R input connectors to the R output con-
nectors of other devices, and its L input connectors to their L
output connectors .
XLR: balanced XLR audio cables
Insert the balanced XLR plug until the lever locks . Press
this lever when disconnecting .
RCA: RCA audio cables
Connect the white pin plugs to the white (L) jacks and
connect the red pin plugs to the red (R) jacks .
o Change the input polarity setting (Invert>) to reverse the
HOT/COLD settings of the XLR jacks (page 20) .
o This unit does not have a phono equalizer, so record players
cannot be connected to it directly .
To use a record player with this unit, connect it through a
phono equalizer, for example .
o Use commercially available cables for connections .
B
Grounding connector (SIGNAL GND)
Using a commercially available sheathed wire to connect this
to the grounding terminal of a Super Audio CD player, power
amplifier or other device might improve the audio quality .
o This is not a safety ground .
At Esoteric, we use ESOTERIC MEXCEL stressfree cables for
reference .
For detailed information, access the following website .
http://www . e soteric . j p/products/esoteric/accessory/indexe . h tml
C
Analog output connectors (LINE OUT)
These output 2-channel analog audio .
Connect these to the analog input jacks of a power amplifier, for
example .
Connect this unit's R output connectors to the R input con-
nectors of other devices, and its L output connectors to their L
input connectors .
XLR: balanced XLR audio cables
Insert each balanced XLR plug in until the connector
locks .
RCA: RCA audio cables
Connect the white pin plugs to the white (L) jacks and
connect the red pin plugs to the red (R) jacks .
o Use commercially available cables for connections .
11