Names And Functions Of Parts (Remote Control) - Esoteric Grandioso C1 Mode D'emploi

Names and functions of parts (remote control)

a
b
c
d
When the main unit and the remote control both have but-
tons with the same functions, this manual explains how to
use one of the buttons. The other corresponding button can
be used in the same manner.
16
o The buttons not explained here do not function with this
product .
o This remote control can also be used for other Esoteric Super
Audio CD/CD players and D/A converters .
o Some models will not pause when you press the playback/pause
button (7/9) button .
a
STANDBY/ON (setting) button
Use to confirm selection of some of the settings explained in
"Additional settings" (pages 21-24) . You can also assign a
name to a connector using this button (page 23) .
o You cannot turn the unit on or off using this button .
b
INPUT (k/j) buttons
Press these buttons to switch between input sources . Select the
input that is connected to the device you want to use .
Use to select settings for "Balance and output level settings"
(page 19) and "Additional settings" (page 21) .
Use as cursor keys when entering an input source name .
e
c
SETUP button
f
Use with "Balance and output level settings" (page 19) and
"Additional settings" (page 21) .
d
DIMMER button
Use to adjust the brightness of the display and indicators (page
18) .
e
VOLUME (+/−) buttons
Use to adjust the volume . Press the + button to increase the
volume and the − button to decrease it .
o If you set the RCA 2 input jacks to "THRU", the VOLUME but-
tons will not work when the input is set to RCA2 (page 22) .
f
MUTE button
Press this button to temporarily mute the sound .
Press again to restore the volume setting (page 18) .
o When muted, "MUTE" and the ordinary display are shown
alternately .