Balance And Output Level Settings - Esoteric Grandioso C1 Mode D'emploi

Balance and output level settings

You can set the left and right balance, output level and phase inver-
sion . You can set these independently for each of the inputs .
1
Turn the INPUT knob to select the input source you
want to set.
2
Press the SETUP button repeatedly to select the set-
ting item you want to change.
Each time you press the SETUP button, the display changes .
o While making these settings, the SETUP indicator appears at
the top left of the display .
o If you do nothing for 10 or more seconds, setting mode will
end and ordinary display will resume .
3
Press the INPUT (k/j) buttons to change the
setting.
4
Press the SETUP button repeatedly until the display
resumes showing its usual contents.
Setting mode ends when the usual contents are
shown.
Setting mode will also end and the ordinary display will reap-
pear if nothing is done for 10 or more seconds .
o These settings will be retained even if the power cords are
disconnected .
19