Turning The Unit Off; Muting The Output; Tone Controls - Esoteric grandioso f1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Basic operation (continued)

Turning the unit off

There might be noise from the speakers if the unit is turned off sud-
denly. When you turn the unit off, follow the steps below.
1
If a connected device is playing back, stop playback.
2
Turn the unit's VOLUME knob counterclockwise to
minimize the volume.
o Always turn the volume to the minimum level before you turn
the unit on or off. Failure to do so could cause sudden loud
noises that might result in harm to your hearing or damage to
the speakers when you turn the unit on.
3
Press the POWER button to turn the unit off.
4
Turn off the connected input source devices.
18

Muting the output

Press the MUTE button to temporarily mute the sound. Press again to
restore the volume setting.
o When muted, "MUTE" blinks on the screen.
o You can also restore the sound by turning the VOLUME knob or by
pressing the VOLUME buttons (+/−).

Tone controls

You can separately adjust the levels of low (BAS), medium (MID) and
high (TRE) frequencies.
o These adjustments have no effect when tone bypass is on.
Before adjusting them, press the TONE bypass button so that
"TONE" appears at the top of the display.

Publicité

Table des Matières
loading

Table des Matières