HBM SLB700A/06VA1 Fiche Technique Et Notice De Montage page 8

8
1 Scope of delivery
 1 strain transducer SLB‐700A/06VA1 (version with voltage output 0 to 10 V)
or SLB‐700A/06VA2 (version with current output 4 to 20 mA)
 1 Mounting instructions
2 General application instructions
The SLB‐700A/06VA1 and SLB‐700A/06VA2 strain transducers are suitable
for the measurement of positive and negative strains. They provide highly ac-
curate static and dynamic force measurements and must therefore be han-
dled very carefully. Particular care must be taken when transporting and
installing the devices. Dropping or knocking the transducers may cause per-
manent damage.
The specifications list the permissible limits for mechanical, thermal and elec-
trical stress. It is essential that these are taken into account when planning the
measuring set-up, during installation and, ultimately , during operation.
HBM
SLB700A/06VA1, SLB700A/06VA2
A3253-2.0 en/de/fr