Technical Data; Cordless Screwdriver; Mains Adapter; Transport - Maxx-world 06656 Mode D'emploi

EN
Problem
The power tool can-
not be switched on.
The power tool does
not work correctly.

Technical Data

Article number:

Cordless Screwdriver

Model number:
Idling speed:
Rated voltage:
Charging time:

Mains Adapter

Model number:
Input:
Output:
Protection class: II

Transport

The Li-ion batteries in the device are subject to the provisions of hazardous goods law.
The batteries can be transported on the road by users without any further conditions.
If they are shipped by third parties (e.g.: air transport or carrier), special requirements
for packaging and labelling must be noted. A hazardous goods expert must be consulted
when preparing the item for shipment.
Possible cause
The battery for the power tool
is too weak.
Is the rotation direction
changeover switch (4) in the
middle position?
Is the bit blunt or damaged?
Is the workpiece not suitable
for the power tool?
The battery is no longer func-
tional.
06656
HYS-2032
200 rpm
3.6 V DC (Li-ion battery 2000 mAh)
4 – 5 hours for an empty battery
JLH030600500G
100 – 240 V~, 50 – 60 Hz, 8 W
6 V DC, 500 mA
26
Fix
Charge up the battery.
Set a direction of rotation.
The bit can no longer be
used. Contact the customer
service department.
Only use the power tool with
workpieces that are suitable
for cordless screwdrivers.
Contact the customer service
department.