Intended Use; General Power Tool Safety Warnings; Workplace Safety; Electrical Safety - Maxx-world 06656 Mode D'emploi

Dear Customer,
We are delighted that you have chosen this cordless screwdriver.
Before using the device for the fi rst time, please read these operating instructions
carefully and keep them for future reference and other users.
The manufacturer and importer do not accept any liability if the information in these
operating instructions is not complied with.
If you have any questions about the device and about spare parts/accessories, con-
tact the customer service department via our website: www.service-shopping.de

Intended Use

• This power tool is intended to be used to screw in and release screws.
• The light of this power tool is used to light up the direct working area for the power
tool and is not suitable for illuminating rooms within a household.
• The power tool is for personal use only and is not intended for commercial applica-
tions.
• The power tool should only be used as described in the instructions for use. Any other
use is deemed to be improper.
• The following are excluded from the warranty: all defects caused by improper han-
dling, damage or unauthorised attempts at repair. This also applies to normal wear
and tear.

General Power Tool Safety Warnings

WARNING: Read all safety notes, instructions, illustrations and technical
data provided with this power tool. Failure to follow the instructions listed be-
low may result in electric shock, fi re and / or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in all the safety instructions listed below refers to mains-op-
erated (corded) power tools and to battery-operated (cordless) power tools.

1) Workplace Safety

■ Keep your work area clean and well lit. Cluttered or dark areas invite accidents.
■ Do not operate the power tool in potentially explosive atmospheres containing
fl ammable liquids, gases, or dusts. Power tools create sparks which may ignite
the dust or fumes.
■ Keep children and bystanders away while operating the power tool. Distractions
can cause you to lose control of the power tool.

2) Electrical Safety

■ The power tool plug must match the outlet socket. The plug may not be mod-
ifi ed in any way. Do not use any adapter plugs with earthed (grounded) power
tools. Unmodifi ed plugs and matching outlets will reduce risk of electric shock.
17 EN