Answer Alarm Call; Remote Control - Samba DSD EVOLU 7 GSM Guide D'utilisation

or [At Home] lights will be off. It means disarm setting successful.
Remote Control Operation: Press [
Main Unit Operation: input system password + [#]
LCD display:


Answer Alarm Call

When the main unit sounds alarm, it will dial the preset numbers. If no
one answers the call, the system will call the next user number
automatically. The system will call each preset numbers for 3 times in
order.
If you answer the call, you will hear the pre-record voice. You can set
system via your telephone or mobile phone keypad.
If you hang-up directly without answering the call, the system will call
each preset number for 3 times circularly.
Press [*]: Read the alarm information.
Press [1]: Main unit stops alarming and Arm; it stops calling users.
Press [2]: Main unit stops alarming and Disarm; it stops calling users.
Press [3]: Siren off and monitors the scene for 30 seconds; for continued
monitoring, press [3] again to monitor for another 30 seconds.
Press [4]: Main unit starts a 30-second two-way intercom. It cannot be
controlled by the mobile during the time of intercom.


Remote Control

Dial the number associated to the alarm main unit by phone (mobile
phone), and after one ringing cycle, you can hear a voice prompt "Please
enter password". If the password is right, you will here "Press 1 to arm,
Press 2 to disarm, Press 3 to Monitor, Press 4 to Intercom". If the
password is wrong, you will hear a prompt voice "wrong password,
please re-enter".
Press [1]: arm, if finished successfully, you will hear a voice prompt
"System armed".
] button on remote controller
62