Delete Sms Receiving Number; Defense Zone Programming; Home Arm Defense Zone Setting - Samba DSD EVOLU 7 GSM Guide D'utilisation



Delete SMS Receiving Number

In setup state, use keypad to input [57] ~ [59], and then press [#] button
to confirm. The main unit will make a beep, the [Signal] indicator will
flicker once and you will hear "delete completed", which indicate SMS
number is deleted successfully.
Operating method: [XX]  [#]
XX indicates: address codes of message-receiving numbers from the first
group to the third group [57] ~ [59]
For example: delete the first SMS user number from the system
Operating method: [57]  [#]


Defense Zone Programming

If you want to change the alarm attribute of defense zone, such as turn off
the siren when system alarms, you can do it by defense zone
programming. In setup state, first input [60], then the defense zone
number [01~99], then input defense zone type [1~4], then input defense
zone location number [1~8], and then select siren on/off [0/1], at last
press [#] to confirm. You will hear the main unit emit a long beep and a
voice prompt "setting completed".
Operating method: [60] [AA] [B] [C] [D] [#]
AA: defense zone number
B: defense zone type
[1]: real-time defense zone
[3]: 24 hours defense zone
C: defense zone location
[1] SOS Alarm
[4] Door Alarm
[7] Balcony Alarm
D: siren ON/OFF: [0] OFF, [1] ON
For example: set defense zone 12 to be 24-hour, fire alarm and siren on
Operating method: [60] [12] [3] [2] [1] [#]


Home Arm Defense Zone Setting

If you want some detectors work and some do not, you can use [Home
[01~99] means zone 1 to zone 99;
[2]: 40 seconds delay defense zone
[4]: bypass defense zone
[2] Fire Alarm
[5] Hall Alarm
[8] Boundary Alarm
58
[3] Gas Leak Alarm
[6] Window Alarm