Voice Recording; Siren Setting - Samba DSD EVOLU 7 GSM Guide D'utilisation

Arm] function.
In setup state, use keypad to input [61], then choose the corresponding
defense zone number [01~99], then choose [Home Arm], and then
choose whether alarm [0/1] button, and finally press [#] to confirm. The
main unit will make a long beep and a voice prompt "setting completed".
Operating method: [61]  [XX]  [A]  [#]
XX indicates: [01~99] is defense zone 1 to defense zone 99
A indicates: [0] Home arm but not alarm
[1] Home arm and alarm
For example: set defense zone 11 to be Home arm and alarm
Operating method: [61] [11] [1] [#]
For example: set defense zone 12 as Home arm but not alarm
Operating method: [61]  [12] [0] [#]


Voice Recording

In setup state, use keypad to input [701], and then press [#] to confirm.
The main unit will emit a beep and the [
10 seconds countdown, recording starts: record at 30cm away from the
main unit with moderate tone; 10 seconds later, the main unit will make a
beep indicating the recording stops and the recorded voice will replay.
Operating method: [701]  [#]
LCD display:


Siren Setting

In setup state, use keypad to input [75]; in the operation of arm/ disarm by
remote control, select if the siren sounds or not by [0/1] button, and then
press [#] to confirm. The main unit will emit a long beep and a voice
prompt "setting completed".
Operating method: [75]  [A]  [#]
A indicates: [0] Siren off; [1] Siren on; System default: [0] Siren off
For example: set siren on when arm/ disarm
] indicator is on, and after
59