Clock Setting; Timing Settings; Timely Arm - Samba DSD EVOLU 7 GSM Guide D'utilisation

Note：the operation password and the programming password can not be set
as the same number.


Clock Setting

In setup status, use keypad to input [32], then input the last 2 digits [AA]
of the present year, the two digits [BB] of the month, the two digits [CC]
of the date, the two digits [DD] of the hour (24-hour system), the two
digits [EE] of the minute, the two digits [FF] of the second, and finally
enter [#] to confirm. You will hear a long beep and a voice prompt
"setting completed".
Operating method: [32][AA][BB][CC][DD][EE][FF][#]
AA indicates: the last 2 digits of the present year
BB indicates: the 2 digits of the present month
CC indicates: the 2 digits of the present date
DD indicates: the 2 digits of the present hour
EE indicates: the 2 digits of the present minute
FF indicates: the 2 digits of the present second
For example: set the time as 15:35:40, Oct. 1st, 2009
Operating method: [32][09][10][01][15][35][40][#]


Timing Settings

1 Timely Arm

In setup status, use keypad to input [33~35], then input the hour [AA] and
minute [BB] of the time you want to set to arm, and finally input [#] to
confirm. You will hear a long beep and a voice prompt "setting
completed".
Operating method: [XX][AA][BB][#]
XX indicates: the address code 33, 34, 35 of the timely arming
AA indicates: the hour of the setting time
BB indicates: the minute of the setting time
For example: set the arm time as 45' 10pm
Operating method: [33][22][45][#]
LCD display:
55