Out Arm; Home Arm; Disarm - Samba DSD EVOLU 7 GSM Guide D'utilisation


Emergency Alarm: Press


Out Arm

It means to guard all around your house while everyone is going out; all
the detectors of the host are always working; when the detector is
triggered by detecting source (anti-theft, fire prevention, gas leak, etc.),
the alarm system will sound the alarm.
Press [Out Home
second and totally 100 beeps. The [OUT ARM] indicator will be on
without flashing. It means Out Arm is set successfully.
Arm Operation: Press [Out Home
status 100 seconds later.
LCD display:


Home Arm

It means, for the safety, while somebody is at home, you need to enable
the peripheral door, window, balcony and boundary detectors of the alarm
system while prevent from triggering the indoor detectors, which may
cause improper warning; then, you shall select Arm at Home, let just part
of the detectors work and disable the other parts.
Main Unit Operation: Press [At Home
Remote Control Operation: Press [
LCD display:


Disarm

It means to stop the alarm when the main unit sounds the alarm or make
the alarm system in the state of non-warning. After disarming, even if you
trigger the detector, the main unit would not sound alarm (excluding
24-hour defense areas).
Use keypad to input system password, then press [#] button. [Out Home]
button, system will alarm at once.
] button on keypad, system will make a beep per
] button on remote controller
61
] button, the system will enter arm
] button on keypad