Emergency Help; System Dialing Function; Alarming Record Checking - Samba DSD EVOLU 7 GSM Guide D'utilisation

Press [2]: disarm, if finished successfully, you will hear a voice prompt
"System disarmed".
Press [3]: monitoring for 30 seconds, to continue monitoring, press [3]
again to monitor for another 30 seconds.
Press [4]: two-way intercom for 30 seconds. You can't operate the main
unit during this time.


Emergency Help

Press [Emergency
controller or wireless panic button, the main unit will alarm and make call
to the preset user numbers.


System Dialing Function

In disarm status, you can use the main unit to make any call just like a
land-line telephone. Dial telephone number on keypad, press [
the main unit will make a beep and the [Signal] indicator will be flashing.
After the call, press [
status.

Alarming Record Checking

In disarm state, input [*0#], then the main unit will make a long beep and
enters the state of alarm record checking. After displaying the alarm and
defense zone number indicator, the LCD screen will display the exact
alarming time of this defense zone. Press 2, you can upturn to check the
previous alarming record; press 8, downturn to check; and press [*#] to
exit checking.
For example: the 51st defense zone; the 7th alarming; alarming time:
12:10, August 1st, 2008. LCD display for one second,
and then display the alarming time:
] button on keypad, or [
] button again, the main unit will be in disarm
63
] button on remote
] button,