Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Pressing arm at home followed by SOS alarm button immediately, the system is
armed at home at once.
c. Disarm: After input correct password, press "Disarm" button, home and out
LED are off. The system is disarmed.
d. Users can press SOS alarm button to ask for help in emergency at any time.
3.7 Remote arm/disarm and monitor
When user dial the number of main panel, main panel would answer the phone
automatically, then enter correct password (default: "1234"), after one beep, user
could control the system remotely by pressing following keys.
Press 1
System Armed
Press 2
System Disarmed
Press *
Onsite monitoring (30 seconds)
Press #
Release the alarm and hang up the phone
3.8 Alarm activated, answer and release
1) Alarm Activated
The following way could activate the alarm:
Any time press panic key of remote controllers or keypad on main unit;
Any time gas detectors detect the gas leakage;
In arm status, somebody open the door/window installed with door contact sensor
or walk around in the room/hall installed with PIR detectors.
2) Valid answer/release alarm
When one alarm occurs, siren sound and flash, meanwhile, the system dial the 6
groups of preset user phone numbers circularly up to 3 times if there is no phone
answer or release action.
Users could hear the preset alarm voice message when phone call answered,
press "*" could make 30 seconds on site monitoring, press "#" would release the
alarm, main panel would not dial anymore.
4. Usage of wireless remote controller
The remote controller has four buttons: Arm Away Button，Arm at home button
Disarm Button，Panic Button .
-- - 35 --
Publicité
Chapitres
Table des Matières
