Procedure For Tilting Down - Yamaha 40V Manuel D'utilisation

UP
EMG63210
PROCEDURE FOR TILTING UP
Power trim and tilt model
1) Remove the fuel-line connection from
the motor.
2) Push the power trim and tilt switch
"UP" until the outboard has tilted up
completely.
701046
3) Turn the tilt-support lever toward
engine
engine.
w
After tilting the engine, be sure to sup-
port it with the tilt-support lever. Other-
wise, the engine could fall back down
suddenly if oil in the power trim and tilt
unit should lose pressure.
403011
EMG64011

PROCEDURE FOR TILTING DOWN

Hydro-tilt model
1) Release the tilt support lever holding
the rear of the top cowling with one
hand.
2) Tilt the engine down.
EMG64110
PROCEDURE FOR TILTING DOWN
Power trim and tilt
1) Push the power trim and tilt switch
"UP" until the engine is supported by
the tilt rod.
2) Release the tilt-support lever.
3) Push the power trim and tilt switch
"DN" (Down) to lower the engine to
411035
the desired position.
3-29
bracket and support
GB
the