Télécharger Imprimer la page

Operation After A Long Period Of Storage - Yamaha 40V Manuel D'utilisation

Masquer les pouces Voir aussi pour 40V:

Publicité

EMF43510
Engine
8 Check the engine and engine mounting.
8 Look for loose or damaged fasteners.
8 Check the propeller for damage.
cC
Do not start the engine out of water.
Overheating and serious engine damage
can occur.
EMF45010
OPERATION AFTER LONG PERIOD
OF STORAGE(for Autolube system
model)
When operating the engine after a long
period (12 months) of storage, proceed as
follows:
1) Use a 50 : 1 gasoline-oil mixture to
start the engine.
2) Start the engine. Leave it idling.
w
8 Do not touch or remove electrical parts
when starting or during operation.
8 Keep hands, hair, and clothes away
from flywheel and other rotating parts
while engine is running.
3) Watch for oil flowing through the oil
feed pipes. After any air in the oil
212011*
lines has been expelled, YAMAHA
AUTOLUBE SYSTEM should supply
oil normally. If no oil has begun flow-
ing after 10 minutes of idling, consult
your Yamaha dealer.
cC
When operating the engine after a long
period of storage, be sure to take the
above steps; otherwise, engine seizure
may occur.
3-9
GB

Publicité

loading

Ce manuel est également adapté pour:

50h