Installation Instructions - Avintage AV22XI Notice D'utilisation

case, contact your after-sales service.
Trouble shooting
• Any electrical work should be carried out by a qualified and skilled technician.
• The appliance should be repaired by an accredited repair centre, using only manufacturer's original
spare parts.
The appliance is designed for home use only. The manufacturer declines any liability whatsoever in
the case of other use.
This appliance meets the requirement of the following European Directives, and notably
complies with the following standards:
• 2011/65/EU (ROHS)
• 2006/95/CE on electrical safety
• 2004/108/CE on electromagnetic compatibility
• 643/2009/CE relating to energy labels

3. INSTALLATION INSTRUCTIONS

Before using this appliance
• Remove the exterior and interior packing.
• Check to be sure the following parts are included: AV22XI, 3 wire shelves and 1 instruction manual.
• Before connecting the appliance to the power source, let it stand upright for approximately 24
hours. This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
• When disposing your appliance, please choose an authorized disposal site.
• Place your appliance on a floor that is strong enough to support the appliance when it is fully
loaded.
• Keep the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.).
Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Extreme cold or hot ambient temperatures may also cause the appliances not to
perform properly.
Warning: do not use mechanical devices or other
means to accelerate the defrosting process, other
than those recommended by the manufacturer.
Warning: keep ventilation openings in the appliance
enclosure or in the structure clear of obstruction.
22