Installation Instructions - Avintage AV46CDZI Notice D'utilisation

MODEL 122cm 3 ZONES
Door
Digital control panel
Handle
Digital control panel
Shelves
Removable presentation shelf

INSTALLATION INSTRUCTIONS

Before Using Your Wine Cooler
Remove all exterior and interior packing.
Before connecting the Wine Cooler to the power source, let it stand upright for approximately 24 hours.
This will reduce the possibility of a malfunction in the cooling system caused by handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
The door on this appliance can be opened from either the left or the right side. The unit is delivered with the door opening
on the left side (The maximum angle of opening of the door is
follow the instructions 'Reversing the door swing of your appliance'.
INSTALLATION OF YOUR WINE COOLER
This device is designed to be incorporated into fitted kitchen units
The appliance should be positioned in a well-ventilated, dry room.
Place your Wine Cooler on a position that is strong enough to support it when it is fully loaded. To level your Wine Cooler,
adjust the front leveling leg at the bottom of the Wine Cooler.
This appliance must be fixed at the top and the bottom using the rail provided for the purpose in order to avoid any risk of
tipping when the shelves are slid out
Condensor Cabinet Leveling legs
100°"). Should you wish to open the door from the right,
27