Function; Adjusting The Flow Time; Important - Franke AQUA741 Notice De Montage Et De Mise En Service

13. Function

Trigger the flow of water
13.1 Press the pressure cap.
• The water will flow.
• The water flow stops automatically once the preset flow time has expired.
☞
The flow time is adjustable from 1 - 50 seconds.
Temperature selection

14. Adjusting the flow time

14.1 Set the desired temperature of the mixed water.
14.2 Using a screwdriver, carefully take off the stopper.
14.3 Remove the stopper.
14.4 Release the grub screw with an Allen key.
14.5 Remove the pressure cap.
14.6 Use a screwdriver to set the flow time.
a: Blade width 3 mm
+ longer flow time (max. 50 s)
– shorter flow time (min. 1 s)
14.7 Trigger the fitting to measure the flow time.
☞

Important!

When putting the pressure cap in place, ensure that the tappet engages with the
corresponding groove.
14.8 Once the desired flow time has been set, put the pressure cap in place.
14.9 Reassemble in reverse order.
7