How To Get A Blood Drop / How To Carry Out The Test - IBP TD 4222 Mode D'emploi

how to carry out the test
1. Feed the test strip into the test strip opening with the contacts first
and the device display facing you (see Fig. 16). You should ensure
that the test strip is firmly located in the device to achieve exact
measured results. The device switches itself on automatically. The
display will show "CHK" and the "Test strip" symbol. After this,
the surrounding temperature, the
are displayed. You should code your device (see Page 11) if the
code number shown in the display is not the same as the code
number on the test strip container.
2. Use the pricking aid to obtain a rounded blood drop of at least 2
microlitres. When the
blood drop to the absorption window on the test strip at the location
where the window and gap meet. Do not press your finger against
the test strip, and do not apply smeared samples.
3. The control window in the test strip must be completely filled with
blood before the device can start the countdown (Fig. 17). If the
control window is not completely filled with blood (Fig. 18) and the
device starts the measuring process, do not apply more blood sub-
xxxZie
the blood sugar test 9
symbol and the code number
symbol flashes in the display, apply the
right
wrong
( Fig. 17)
( Fig. 16)
19