Operation - Dimplex WPM EconPlus Manuel D'utilisation

4

4 Operation

The heat pump manager is operated using 6 keys: Esc,
Mode, Menu, , , . Different functions are assigned to
⇓ ⇑ ↵
these buttons according to the current display (Standard or
Menu).
The operating status of the heat pump and the heating
system is indicated in plain text on a 4 x 20 character LC
display (see Chap. 9 on p. 14).
Fig. 4.1: Standard LC display - main display with operator buttons
NOTE
Contrast:
The display can be adjusted for contrast. Do this by depressing the
buttons (ESC) and (MODE) at the same time until the adjustment process
has been completed.
Increase the contrast by one level with every simultaneous pressing of
the ( ) button. Reduce the contrast by pressing the ( ) button.
Button Standard display (Fig. 4.1 on p. 4)
Esc Activates or deactivates the keyboard block
Acknowledges a fault
Mode Selects the operating mode (see Chap. 5 on p. 5)
Menu Jumps to menu
⇓
Shifts the heating curve downwards (colder)
⇑
Shifts the heating curve upwards (hotter)
↵
Table 4.1: Operator button functions
EN-4
No action
6 different operating modes can be selected:
Cooling, Summer, Auto, Party, Vacation, 2nd heat
generator.
The menu consists of 3 main levels:
Settings, Operating data, History
(see Chap. 6 on p. 5)
NOTE
Keyboard block, child lock!
To prevent unintentional adjustment of the heat pump manager, press the
button (Esc) for approx. 5 seconds until KEY BLOCK ACTIVE appears on
the display. Cancel the keyboard block using the same procedure.
Change of setting (Chap. 8 on p. 7)
Exits the menu and returns to the main display
Returns from a submenu
Exits a setting without saving changes
No action
No action
Scrolls downwards between menu items on one level
Changes a setting in a downward direction
Scrolls upwards between menu items on one level
Changes a setting in an upwards direction
Selects a setting in the corresponding menu item
Exits a setting and saves changes
Jumps to a submenu