Servis - Husqvarna R 214C Manuel D'utilisation

OPOZORILO:
that is not approved for the product can
cause objects to eject at high speed and
Control points
Parallelism cutting deck with cutting height in position 1
Control of cutting height in position 1
Distance between support plate and drive belt
Distance belt tensioner lever arm and belt guide, disen-
gaged deck
Play
Brake cable
Cable for the hydrostatic transmission pedals
Servisiranje
Pri pooblaščenem servisnem centru opravite letni
pregled, da poskrbite za varno in učinkovito delovanje
izdelka na vrhuncu sezone. Najprimernejši čas za servis
ali pregled izdelka je zunaj sezone.
Ko pošiljate naročilo za rezervne dele, navedite podatke
o letu nakupa, modelu, vrsti in serijski številki.
Vedno uporabljajte originalne rezervne dele.
1590 - 001 - 11.12.2020
To use a cutting deck

Servis

cause serious injury. Do not use other
cutting deck types than specified in this
manual.
2–4 mm / 0.079–0.157 in
25 ± 2 mm / 0.98 ± 0.079 in
3-6 mm /1/8 in -1/4 in
17 ± 5 mm / 7/16 in ± 3/16 in
1 mm / 0.040 in
0 mm / 0 in
125