Compact Discs - Denon DN-D4000 Mode D'emploi

(4) RC-D40 Rear panel
@9
Control connector
• Connect this connector to the REMOTE
connector on the DN-D4000 (main unit) using
the included control cord.
(5) Display
u w !0
i q e
q
Track, minute, second and frame
displays
• These displays indicate current position
information.
w
Loop mode indicat ors
• DN-D4000 has Loop mode indicators consist of
two sets of A (A1, A2), B and two arrows. A
and B marks indicate A and B points are exist.
• Two arrows indicate loop setting mode as
follow.
Example: A1 B
A1 B Both arrows on:
Seamless Loop mode
A1 B , A1 B Both arrows flashing:
Seamless Loop Playing
A1 B A1 B Left arrow on, right flashing:
,
Exit play from Seamless Loop
e
Time mode indicators
• When the TIME/TOTAL button is pushed, the
Time mode indicator switches as follows:
ELAPSED:
Track's elapsed time is displayed.
REMAIN:
Track's remaining time is displayed.
T. + ELAPSED:
The total elapsed time of disc
programmed track is displayed.
t r
y !1 o
T. + REMAIN:
The total remaining time of disc or
programmed track is displayed.
r
Mode display portion
FILE : This lights when the file name of
MP3 is displayed.
FOLDER : This lights when the folder name of
MP3 is displayed.
TITLE : This lights when the title in the MP3
ID3-Tag or CD Text is displayed.
MP3 : This lights when a disc containing
MP3 format file is loaded.
REPEAT : This lights in the repeat mode.
ALBUM : This lights when the album name is
displayed.
ARTIST : This lights when the artist name is
displayed.
PLAY LIST : This lights when the play list is
performed.
t
Character display
• This displays various operational information,
text message, etc.
y
Play mode indicators
• When SINGLE indicator lights up, playback will
finish at end of current track.
• When CONT. indicator lights up, playback
or
continues.
u
Digital out indicator
• This lights when the digital output is turned on
within the preset mode.
i
MEMO indicator
• MEMO sign appears in display when there is a
memory setting for the currently playing track
or the track at which the standby mode is
currently set.
o
Button lock indicator
• Some of the buttons do not function when this
indicator is lit.
4

COMPACT DISCS

(1) Precautions on handling compact discs
• Do not allow fingerprints, oil or dust on the surface of the compact disc. If the signal surface is dirty, wipe it
off with a soft, dry cloth. Wipe in circular motions from the center and out.
• Do not use water, benzene, thinner, record sprays, electrostatic proof chemicals, or silicone-treated cloth to
clean discs.
• Always use care when handling discs to prevent damaging the surface, in particular when removing a disc
from the case and returning it.
• Do not bend compact discs.
• Do not apply heat to compact discs.
• Do not enlarge the hole in the center of the disc.
• Do not write on the disc and do not attach any labels.
• Condensation will from on the disc surface if it is brought into a warm room from a cold area, such as outdoors
during winter. Wait until the condensation disappears. Never dry discs with hair dryers, etc.
(2) Precautions on storage
• After playing a disc, always return it to its case.
• Keep discs in the cases when they are not to be played. This will protect them from dust and dirt and prolong
their service life.
• Do not store discs in the following places:
1) Places exposed to direct sunlight for a considerable time.
2) Places subject to accumulation of dust or high humidity.
3) Places exposed to high temperatures, such as close to heater outlets.
ENGLISH
!0
Play Position indicators
• Play position indicator:
The 30 white dots indicate where is playing
visually in a track in the normal play.
• End of Message:
When the time remaining to the end of the
track is less than the specified time, the EOM
(End Of Message) play position indicator
flashes along with the remaining time,
notifying of the track end.
The EOM time can be set with the presets.
!1
Pitch display
• This numeric indicator display the playback
speed (pitch).
9